Skip to content

Reports

The overview

The overview lists your projects and those shared with you, with their visits, the change from the period before, the visits per day over the last 30 days, pages per visit, bounce rate, visit duration, and alerts.

  • Click a column's title to sort by it, and again for the other way round.
  • Star a project with the Star button on the project's page to keep it at the top of the overview, where a small star marks it; Starred shows the starred projects alone.

Needs attention

The bell in the top bar counts what needs your look in your own projects, and leads to the Needs attention page, which lists them over the last 7 days against the 7 before:

  • a project gone silent for 2 days or more;
  • traffic down by half or more;
  • visits left out by the filters (bots, hosting networks, spam, blocked countries) at least doubling on the week before;
  • an address marked not found viewed 10 times or more (see Not found);
  • a monitored site down, or with a certificate expiring within 14 days (see Is the site up?);
  • for administrators, hostnames that send hits no project claims.

Dismiss all, or the ✕ on a row, hides them for a week; those still there then show again. The count can take up to 5 minutes to show a new alert. On the overview, an icon marks a project with alerts, judged over the overview's period, and names them when you point at it. A project's report shows its alerts above the figures.

To have them come to you, give a project a webhook on the Alerts page of its settings: a Slack or Mattermost incoming webhook, or any address taking JSON ({"text": "…"}). The app checks every 5 minutes, and posts each problem once, when it appears; a problem that goes away and comes back is posted again. Dismissing a problem in the app doesn't stop the post: the channel isn't yours alone. If a post fails, the settings say why, and the app tries again at the next check. Set PUBLIC_URL for the posts to link to the report. On an instance that sends mail, Email them to me too sends the same alerts to the project's owner.

Email reports

On an instance that sends mail, your account page lists the projects you can read, with an Email reports choice for each: none, weekly or monthly. A weekly report goes out on Monday at 7:00 your time, for the week before; a monthly one on the 1st, for the month before. Each gives the figures against the period before, the top pages and referrers, and, for the projects you own, what needs a look, with a link to the full report. They are plain text: they read the same in any mail client. The first goes on the next Monday, or 1st, after you ask; and a viewer whose access ends stops getting them.

A project's report

A project's page shows visits, page views, bounce rate, visit duration, the visitors online now, a chart, and the top pages, referrers, sites, countries, browsers, operating systems and devices. Click a site to see the figures of that site alone.

Notes explain a change on the chart: a release, a campaign, an outage. Under the chart, give a date and time, in your time zone, and a short text. The chart marks the moment with a dashed line; point at the marker above it to read the note. Notes show on share links and to viewers too; only the owner adds and deletes them.

Above the countries, a map shades each country by the visits from it; hover over a country for the figure, click it to filter the report. The map comes from Natural Earth's public-domain data, served by the app itself; very small countries, too small at its scale, appear in the table only.

The pages come in three tabs: Pages counts page views; Entry pages and Exit pages count visits by the page they started on and the page they ended on. Campaigns, next to the referrers, are read from the page each visit started on.

Referrers are grouped by domain (google.com, not every search URL). Campaigns come from the utm_campaign and utm_source of the page each visit started on.

Engagement and speed

Under the tables, Engagement and speed takes the top pages again and tells how their views went:

  • Time: the median time on the page, from the page view to the last heartbeat. A view counts up to 30 minutes, beyond which the tab was left open. A view with no heartbeat, left before any, has no time and is left out.
  • Scroll: the median of how far down each view went.
  • LCP, INP and CLS: the Core Web Vitals, at the 75th percentile, as Google judges them: three views in four did at least as well. LCP is when the main content showed; INP, how long the page took to answer the slowest click or key; CLS, how much it moved while loading. Each is green, orange or red by Google's thresholds (2.5 and 4 seconds; 200 and 500 ms; 0.1 and 0.25).
  • Load: the load time, at the 75th percentile.

A dash means no view measured it: pages viewed before the tracker of 0.5, browsers that don't measure vitals yet (older versions of Safari and Firefox), or a single-page app's later views, which have no LCP. All pages at the bottom gives the same columns for every page. In consent-exempt mode, a figure measured by fewer than 10 visits shows as a dash.

Not found

When a site marks the page it shows for a missing address (how), the report gets a Not found card under the tables. The card lists the missing addresses that were viewed, and for each, what led visitors there:

  • for a link on the site itself, the page viewed just before;
  • for a link from another site, the referrer;
  • with neither, "Direct, or unknown".

Fix the link where it is, or redirect the address. In consent-exempt mode, the card names referrers by their site, and leaves out the addresses and sources of fewer than 10 visits.

Ranges

  • "Last 24 hours" and "last 7/30/90 days" end now, and compare with the same length of time just before.
  • "Today", "yesterday", "this month" and custom dates follow your timezone, which your browser reports when you use the app.
  • "All time" starts on the day of the first visit, imported ones included.

Ranges of two days or less are charted by hour, those over two years by month, the others by day. A custom range covers up to 50 years, from 1990 on; when dates are refused, the menu says why and the report shows the last 30 days.

The range you choose holds as you move between projects, the overview and the tables in full, until you choose another; custom dates apply to the page they were chosen on. A browser cookie keeps the choice; it holds nothing else.

Comparisons

A report compares the figures with the period before, of the same length. Compare with, next to the range, offers instead:

  • A year earlier, same weekdays: the same period 52 weeks back, so that a Monday is drawn against a Monday. Over more than two years, charted by month, the same dates of the year before.
  • No comparison: the changes, the chart's dashed line and the tables' earlier columns go.

The overview and the email reports always compare with the period before. On a report, the figures' changes, the chart's dashed line, the goals and the tables in full follow the choice, which holds from one project to the next in a second cookie, as the range does.

Tables in full

The report's tables show their first ten rows. The link at the bottom of each, such as All pages, opens the whole table over the same period and filters, a hundred rows at a time, with each row's share, the count in the compared period and the change. Pages, entry and exit pages, referrers and campaigns can be searched. Click a row to go back to the report, filtered by it. Shared reports have these pages too.

Filters

Click a row in any table (a page, a referrer, a site, a country, a browser, an OS, a device) to narrow the whole report to it, or use Add filter. Filters combine, and show above the report as labels you click to remove.

  • Filtering by page or referrer keeps the visits that include such a page view. A page ending with * covers every page under it: /docs/* keeps the visits that saw a page of the docs.
  • Filtering by country or device keeps those visitors' page views.
  • Under a referrer filter, the referrer table lists the exact links.

Filters live in the URL, so a filtered report can be bookmarked, and the API's stats endpoint takes the same parameters (site, page, referrer, country, device, browser, os, event).

Events

Events lists the custom events sent during the visits the report counts: how many visits sent each one, and their share of all visits (the conversion). Click an event to narrow the report to the visits that sent it; its properties then show below, each with its values.

Goals

Goals are what a project counts as a success: a page seen (/pricing, or every page under a prefix, /docs/*) or an event sent (Signup). Set them on the Tracking page of the project's settings; a project has 20 at most.

The report then lists them: for each goal, the visits that reached it, the conversion rate (the share of the visits counted above), and how both changed from the period before. The report's filters apply: under a country filter, the goals count that country's visits. Click a goal to narrow the report to the visits that reached it.

A goal is a definition, not data: adding or changing one also changes the reports of the past.

The visit log

Visits lists recent visits, those the reports count; Left out lists the others (bots, hosting networks, blocked countries, spam), each with its reason, and All both. The log can be exported as CSV.